GR50
Nomex Grinding Hood
Paired with a Bullard PAPR or supplied air respirators, GR50
Nomex Grinding Hood is designed to meet the challenges
encountered in grinding, brazing, and metalworking
operations. The lightweight outer hood, made from Nomex®,
protects the wearer’s entire head, face, and neck from
sparks and airborne particulates. The inner bib, made from
fame-retardant cotton, is an added protective barrier.
Industrial
Nomex Material – The lightweight outer hood, made from Nomex®,
protects the wearer’s entire head, face, and neck from sparks and
airborne particulates. The inner bib, made from fame-retardant cotton,
is an added protective barrier. The GR50 hood is washable.
Comfortable and Lightweight Fit. Weighing only 16 oz. (475 g), the
GR50 is a lightweight alternative for workers accustomed to wearing
heavier hard-shell respirators during grinding. The GR50 performs well
in tight spaces with its fexible hood and inner window that enhances
the wearer’s mobility. The inner window is made of 0.040” polycar-
bonate and can stand up to temperatures of up to 250°F. The hood’s
fexibility accommodates beards, hearing protection, prescription eye-
wear or safety glasses. Nomex® material complies with NFPA 2112
Standard on Flame-Resistant Garments for Protection of Industrial
Personnel Against Flash Fire.
Head Protection and Climate Control Options. When worn with a
Bullard hard hat, the hood meets ANSI/ISEA Z89.1, Type I require-
ments for protective headwear. A variety of climate control devices
allow workers to cool incoming air to meet their comfort requirements.
Maximum Visibility. Wide-angle face shield and headband suspen-
sion system are positioned to create the maximum viewing area. Re-
placement outer lens helps protect the inner lens from sparks and
debris, extending the usable life cycle of the product.
Breathing Protection. Continuous airfow is delivered through a
unique neck-cuff, maintaining positive pressure inside the hood to
help keep contaminants out.
Approvals
• NIOSH Approved Type C Continuous Flow Class
• Meets ANSI/ISEA Z89.1 – 2014 (R 2019), Type I, Class C Head
Protection*
• Meets ANSI/ISEA Z87.1 – 2020, Z87+ High-Impact Face
Protection
*Head Protection provided, ONLY IF, GR50 hood has a Bullard Hard Hat installed
inside the GR50 hood.
Recommended Respirator Assemblies
EVAGRHT
GR5030
Industry
Metalworking
Chemical Handling
Compatible w/ GR50
EVA PAPR
SAR System
Filters/Cartridges (PAPR)
PAPRFC3 - HEPA Filter
PAPRFC4 - Combination Filter
PAPRFC5 - Combination Filter
Breathing Tubes (PAPR)
PAHBT - Threaded, 26”
PAHBTXS - Threaded, 22”
PAHBTXL - Threaded, 32”
Flow Control (SAR)
F30 - 1/4” Ind. Interchange
F35 - 1/2” Ind. Interchange
Breathing Tubes (SAR)
20BT - Tube w/ S18051 Clamp
SARHBT - Threaded
Outer Lenses (SAR)
GRHOL1 - .040”, Polycarbonate
MB1 - .020”, Clear
Replacement Lens Covers (SAR)
7714 - Mylar®,Clear
20LC - Mylar®,Clear
Climate Control (SAR)
AC1000
HC2400
Frigitron2000
DC5040
Cooling Vests for DC5040 (SAR)
DC70ML - Air-Fed Cool Vest M/L
DC70XXL - Air-Fed Cool Vest XXL
DC705X - Air-Fed Cool Vest 5XL
Suspension (PAPR/SAR)
20RT - Ratchet Suspension
C30R Hard Hat
S51R Hard Hat
Chinstrap/Headstrap (PAPR/SAR)
20NC
Belts (SAR)
4612 - Nylon Belt
36501 - Polyurethane Coated Belt
Accessories (PAPR)
EVABKPK2 - EVA /EVAHL Backpack
SPECTRUM SERIES®
Tight-Fitting Full Facepiece
Respirator System
Spectrum is a Type-C, Continuous Flow Respirator System.
It is available in two sizes, small or medium/large, for a
secure, comfortable ft across a wide range of facial sizes
and contours.
Industrial
Low Profile and Optimal Visibility. The low profle allows users to get
close to their work. This broadens the applications that Spectrum can
be used in. The low profle design also reduces snag hazards. The op-
tically correct lens provides superior peripheral vision. The clear nose
cup allows more light into the masks, minimizing the closed in feeling.
Maximum Protection in its Class. Spectrum offers respirator protec-
tion that meets ANSI/ISEA Z87+ Impact Face Protection.
Comfortable and Lightweight Fit. The lightweight silicone fange
seals softly against the user’s face without feeling slippery. The dou-
ble fange provides a secure, comfortable ft across a wide range of
facial sizes and contours.
Easy to Assemble. The snap together parts make assembly and
maintenance quick and effcient without requiring special tools. The
single facepiece platform design allows for conversion to other respi-
rator confgurations.
Approvals
• NIOSH Approved Type C Continuous Flow Class
• Meets ANSI/ISEA Z87.1 – 2020, Z87+ High-Impact Face Protection
Recommended Respirator Assemblies
SPEC30L
Industry
Painting & Coatings
Chemical Handling
Pharmaceutical
Spray Foam
Compatible w/ Spectrum
SAR System
Breathing Tubes (SAR)
SPECBT - Threaded
Replacement Lens Cover (SAR)
LC - Mylar® Pull-off Lens Covers
Flow Control (SAR)
F40 - 1/4” Adj. Ind. Interchange
F30 - 1/4” Ind. Interchange
F35 - 1/2” Ind. Interchange
Climate Control (SAR)
AC1000
HC2400
Suspension (SAR)
Not Applicable
Chinstrap/Headstrap (SAR)
HSK - Headstrap Kit
Belts (SAR)
4612 - Nylon Belt
36501 - Polyurethane Coated Belt
| Bullard Industrial Health & Safety | Grinding Hood
| Bullard Industrial Health & Safety | Tight-Fitting Facepiece
Scan here for more information!
Scan here for more information!