33
The subfloor must be clean, dry, dust-free,
load-bearing and even. The larger the tiles,
the less unevenness the floor should have.
All tests of the subfloor must be carried out
first (see page 20).
If necessary, the floor should be levelled
using a self-levelling floor levelling com-
pound. Pay attention to the specified maxi-
mum layer thickness and drying times.
Aft erwards, the processing and gluing is
done as described in the previous chapter.
If door frames need to be shortened, they
are “undercut” with a handsaw, an assem-
bly router or a multitool.
TIP: When undercutting the door frame,
guide the cutting tool “on the material” that
will later be installed in the room. Use a lef o-
ver piece for this purpose. This way the cut is
made at exactly the right height.
TIP: With a cross-line laser you can easily
and absolutely accurately measure all floor
and wall surfaces and check horizontal and
vertical flatness.
INSTALLATION ON THE FLOOR