28
06 // APPLICATION
PREPARATION OF THE GLUING
ATTENTION: CLASSEN polymer
tiles are always firmly glued.
Grouting is not necessary due
to the existing micro joint. For
easier installation, CLASSEN polymer tiles
have a tongue and groove profile. When
installing, make sure that the tongue and
groove are completely interlocked.
To glue CLASSEN polymer tiles, use CLASSEN
MultiConnect or one of the recommended
adhesives. At www.classengroup.com/
de/startseite/downloads Technical Data
Sheets you will find a table of recommend-
ed adhesives and sealing materials. Please
observe the respective manufacturer‘s
processing instructions! The groove profile
must be aligned downwards so that the
moisture can drain off .
Although we recommend a selection of
adhesives from other adhesive manufac-
turers, we do not assume any guarantee
or liability for the products specified! The
adhesive recommendation is based solely
on the statements of the respective manu-
facturer, who is also solely responsible for
suitability. Please observe the manufac-
turer’s processing instructions. For more
detailed information on suitability, contact
the adhesive manufacturer’s customer
service.
TIP: Material and application
conditions can influence the
adhesive behaviour diff erently,
therefore we recommend a
prior practical test.